The ETI Max/Min Fridge Freezer digital alarm thermometer indicates temperature over the range of -49.9 to 69.9°C. This fridge thermometer features a large backlit LCD display, a max/min memory function to record the highest and lowest temperatures and an audible alarm. This digital thermometer incorporates two temperature sensors, a remote water resistant probe with a one metre PVC lead for the appliance temperature, and an internal sensor for the room temperature. The external probe can be mounted onto the fridge internal wall using the suction pad or mounting bracket supplied.
For thermometer UKAS calibration, select the points required from the drop down menu. We are UKAS accredited to calibrate between the range -20 to 200°C. For calibration outside this range, we use a third party company to conduct the calibration.
- Programmable audible alarm
- Records the max/min temperatures
- Remote probe
- Abs case
Specification
- range: -24.9 to 69.9°C
- resolution: 0.1 °C/°F
- accuracy: ±1°C
- battery: 3 volt CR2032 lithium coin cell
- battery life: 3000 hours
- display: custom LCD
- dimensions: 16 x 50 x 82mm
- weight: 50 grams
- case material: ABS plastic
- guarantee: one year
- measurement scale: Celsius/Fahrenheit
Instructions for use:
INSTRUMENT OPERATION - The instrument will turn on once the battery is installed. Place the probe within the area to be measured using the sucker or fixing provided. The instrument reading may take a few seconds to stabilise. To change the display to measure the room temperature, press the PROBE button and 'ROOM' will be displayed.
TEMPERATURE ALARM SETTING - PROBE ONLY - To set the audible alarm, press and hold the ALARM SET button, the high alarm temperature will flash in the display. To set the high alarm, press or hold the red button on the back of the unit to adjust the temperature. To set the low alarm press the ALARM SET button again, and press or hold the red button to adjust the temperature. Press the ALARM SET button to confirm.
To turn the alarm on, press the ALARM SET button and 'AL' will be shown in the display. The audible alarm will only sound when the temperature has been exceeded for 5 seconds, and again every 55 seconds thereafter, 'AL' will also flash in the display. Please note: this alarm only works on the probe.
MAX/MIN - Press the MAX/MIN button to display the maximum reading (MAX displayed). Press the MAX/MIN button again to display the minimum reading (MIN displayed). Press MAX/MIN button again to return to normal readings.
Hold MAX/MIN for three seconds to reset minimum and maximum temperature memory. Please note: Max/Min readings are not saved so removal of the battery will clear the max/min readings. °C/°F FUNCTION - Press the red button on the back of the instrument to switch between Centigrade and Fahrenheit.
BATTERY REPLACEMENT - The battery will need to be replaced when the instrument display dims. Replace the battery with a 3 volt lithium CR2032 coin cell. The battery is located under the battery cover on the back of the instrument.
EMC/RFI - Instrument performance may be affected if operated within a high frequency radio field, such as near a mobile phone, or if subjected to an electrostatic shock.
GUARANTEE - This instrument carries a one-year guarantee against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of ETI, be either repaired or replaced without charge. This guarantee does not apply to sensors/probes, where a six-month period is offered. The product guarantee does not cover damage caused by fair wear and tear, abnormal storage conditions, incorrect use, accidental misuse, abuse, neglect, misapplication or modification.
